1/4″ Roundover Edge Profile

Roundovers are a very simple edge profile. A smaller roundover will maximize the visual thickness of the piece. When specifying roundovers, you must consider the top horizontal edge, the bottom horizontal edge, and the vertical corners of the piece to ensure the desired visual appearance. There are various sizes of Roundovers. The minimum required thickness of the countertop is 1-1/2″ for counters with 1/8″ roundover.

QUICK FACTS 1/4″ ROUNDOVER

  • Popular for modern and traditional kitchen styles
  • Will visually increase the thick appearance of the countertop
  • The smallest roundover offered by Grothouse
  • Requires a 1-1/2” thick countertop
  • The price for this profile is Low
1-4_inch_roundover_countertop_edges

Gallery

maple_1-4_inch_roundover_countertop_edges

Edge Grain White Hard Maple

Top Horizontal Edge: 1/4″ Roundover
Bottom Horizontal Edge: 1/4″ Roundover
Vertical Corners: 1″ radius
sapele_mahogany_1-4_inch_roundover_countertop_edges

Flat Grain Sapele Mahogany

Top Horizontal Edge: 1/4″ Roundover
Bottom Horizontal Edge: 1/4″ Roundover
Vertical Corners: 1/2″ Roundover
maple_mix_1-4_inch_roundover_countertop_edges

End Grain Random Mix Maple

Top Horizontal Edge: 1/4″ Roundover
Bottom Horizontal Edge: 1/4″ Roundover
Vertical Corners: 1/4″ Roundover
NEW-1

How To Specify Your Edge Profile

This photo shows how to indicate the top horizontal edge, bottom horizontal edge, and vertical corners of your countertop.

Related Images

maple_wood_countertops_8389

Custom Maple Wood Countertops

cherry_mahogany_butcher_block_countertop_5799

Custom Random Mix of Cherry and Mahogany Butcher Block Countertop 

walnut_wood_counter_7649

Custom Walnut Wood Counter 

1-2in_rounded_corner_quarter_inch_roundover_countertop_edges

1/2″ Round Vertical Corner

squared_corner_quarter_inch_roundover_countertop_edges

Square Vertical Corner