1/8″ Roundover Edge Profile

Roundovers are a very simple edge profile. A smaller roundover will maximize the visual thickness of the piece. When specifying roundovers, you must consider the top horizontal edge, the bottom horizontal edge, and the vertical corners of the piece to ensure the desired visual appearance. There are various sizes of Roundovers. The minimum required thickness of the countertop is 1-1/2″ for counters with 1/8″ roundover.

QUICK FACTS – 1/8″ ROUNDOVER

  • Popular for modern and traditional kitchen styles
  • Will visually increase the thick appearance of the countertop
  • The smallest roundover offered by Grothouse
  • Requires a 1-1/2” thick countertop
  • The price for this profile is Low
image 44

Gallery

walnut_1-8_roundover_countertop_edges

Edge Grain Walnut with Sapwood

Top Horizontal Edge: 1/8″ Roundover
Bottom Horizontal Edge: 1/8″ Roundover
Vertical Corners: 1/8″ Roundover
doug_fir_1-8_roundover_countertop_edges

Flat Grain Rift Cut Doug Fir

Top Horizontal Edge: 1/8″ Roundover
Bottom Horizontal Edge: 1/8″ Roundover
Vertical Corners: 1/8″ Roundover
walnut_sapwood_1-8_roundover_countertop_edges

End Grain Walnut with Sapwood

Top Horizontal Edge: 1/8″ Roundover
Bottom Horizontal Edge: 1/8″ Roundover
Vertical Corners: 1/8″ Roundover
edge-profile-spec-drawing (1)

How to specify your edge Profile

This photo shows how to indicate the top horizontal edge, bottom horizontal edge, and vertical corners of your countertop.

Related Images

image 49

Custom Reclaimed Chestnut Pastore Waterfall Counter

image 50

Custom White Oak Wood Countertop

1-2-rounded-vertical-corner

1/2″ Rounded Vertical Corner

square-vertical-corner

Square Vertical Corner