3/4″ Roundover Edge Profile

Roundovers are a very simple edge profile. A smaller roundover will maximize the visual thickness of the piece. When specifying roundovers, you must consider the top horizontal edge, the bottom horizontal edge, and the vertical corners of the piece to ensure the desired visual appearance. There are various sizes of Roundovers. The minimum required thickness of the countertop is 1-1/2″ for counters with 1/8″ roundover.

QUICK FACTS 3/4″ ROUNDOVER

  • Popular for modern and traditional kitchen styles
  • Will visually increase the thick appearance of the countertop
  • The smallest roundover offered by Grothouse
  • Requires a 1-1/2” thick countertop
  • The price for this profile is Low
3-4_inch_roundover_countertop_edges

Gallery

maple_3-4_inch_roundover_countertop_edges

Edge Grain Maple

Top Horizontal Edge: 3/4″ Roundover
Bottom Horizontal Edge: 1/8″ Roundover
Vertical Corners: 1/8″ Roundover
sapele_mahogany_3-4_inch_roundover_countertop_edges

Flat Grain Sapele Mahogany

Top Horizontal Edge: 3/4″ Roundover
Bottom Horizontal Edge: 1/8″ Roundover
Vertical Corners:Round
image-coming-soon

End Grain

Top Horizontal Edge:
Bottom Horizontal Edge:
Vertical Corners:
edge-profile-spec-drawing (1)

How To Specify Your Edge Profile

This photo shows how to indicate the top horizontal edge, bottom horizontal edge, and vertical corners of your countertop.

Related Images

walnut_wood_countertop_5694

Custom American Black Walnut Wood Counter

mahogany_butcher_block_countertop_6965

Sapele Mahogany Custom Butcher Block Island Countertop

1-2inround_corner_three_quarter_inch_roundover_countertop_edges

1/2″ Round Vertical Corner

square_corner_three_quarter_inch_roundover_countertop_edges

Square Vertical Corner